9.05.2009

All Points West

The best ideas seem to be born out of dorm rooms these days. Following in the footsteps of companies like Dell, facebook, and Google, sisters Katheryn and Elizabeth Fortunato started Lizzie Fortunato jewels while they were students at Duke University. After graduation, the two took their campus curios to the Big Apple where they launched their namesake line in 2007. In addition to putting out her own line every season, Elizabeth also manages to design the jewelry for Victoria Bartlett's VPL runway show. For fall the sisters were inspired by their roadtrip through the American West and aptly titled the collection "Long May You Run." Using stones reminiscent of the canyons and elegantly braided silk thread, these bracelets will certainly have a long run in your winter wardrobe.


What You'll Need:
Embroidery floss
Jewelry wire

Assorted beads

Chain

Bracelet closures

Pliers


There are many different ways these bracelets can be made. First I must note that instead of thick gold chain I decided to use strands of small gold beads that have been sitting in my jewelry box forever. For the longest part of the bracelet simply braid together the chain and/or embroidery floss. Finish off both ends of the braid by knotting it onto a wire-wrapped loop (click here for simple instructions on how to make a wire-wrapped loop). String your beads onto the wire, then finish off with another loop. Attach the chain and bracelet closures, then add any extra braids or dangling charms.


xx,CC

9.01.2009

Border Embroider

I went camping last weekend for the first time in I don't know how many years. While laying in my tent, a symphony of crickets and critters serenaded me to sleep (READ: kept me awake and huddled in a corner away from tent walls). I started to think about my childhood summers spent in the mountains of North Carolina at sleep away camp. Aside from the lack of edible food, no air conditioning, 30 second timed ice cold shower thus being forced to shave my legs on my bed, rock sliding and ending up with scabs all over my bum it was generally a great time! Let's just say I'm an indoor girl. When I stumbled across this Larsen Gray shoulder vest dress, though, I was flooded with memories of whiling away the stifling hours making friendship bracelets in the rec room with my pals. The eco-friendly line comes from Pratt alums Nora Caliguri (the girl who made a dress out of a plastic blue lawn chair on season 1 of Project Runway) and her partner Rachelyn Porter. Made from organic fabric and a can-do attitude, Camp Cheerio would have to approve this DIY activity!


What You'll Need:
Dress
Embroidery floss

Ribbon (optional)
Needle

Thread


First, make yourself a whole bunch of friendship bracelets. Check out instructions here. Sew one end of the bracelets on the strap part of the dress. Personally, I think the dress would look a bit more polished if you then sewed a ribbon around the neckline to cover up the frayed ends at the top.

xx,CC

8.26.2009

Vested Interest

Thank Serena van der Woodsen for single-handedly bringing back the "bobo" - bohemian bourgeois - trend so finely crafted by the twins (you know which ones) circa 2004. This time around, cowboy boots and status handbags have been replaced by chunky necklaces, deconstructed tees, and... fringe. As an update to the flapper staple, Chelsea Flower has created a beaded version to achieve a Native American affect. The result? The perfect piece to wear during your daily routine of picking up bio fair trade groceries and aligning you chakras.


What You'll Need:
Vest (found at TJ Maxx)
Seed Beads

Needle

Thread

Scissors


First decide the color pattern for your seed beads. Next, thread your needle and knot the end. Starting from the inside of the vest, poke your needle through closest to the vertical edge seam. String your beads. Loop the thread back through the beads again from the bottom, but skip the bottom-most bead. This secures the string.

Push the needle and thread back through the vest where you came from the underneath. About 1/2" to the side, bring your needle back up. Bead another fringe string and repeat. repeat. repeat...

xx,CC

8.22.2009

The Bright Stuff

If you thought neons were for preschoolers (c'mon we all thought LA Lights were the bomb), think again! It is time to make like a highlight kid and sport the trend once again. From über cool Alex Wang to established labels such as Marc Jacobs and DKNY, there is no doubt some of the hottest jewelers got their inspiration straight from the runway. If you feel just a tad ostentatious sporting screaming yellow around your neck, you needn't fret. Even Michelle Obama was spotted wearing one of Tom Binn's creations to an event at the Kennedy Center.

From left: Tom Binns, Tom Binns, Givenchy

What You'll Need:
Ribbon
Two pin backs
Chain
Charm (optional)
Plastic lanyard (or neon beads, gems, etc.)
Superglue
Pliers

Scissors

I had a whole box full of plastic string leftover from the summer I was going to make a fortune selling lanyards to all my elementary school buds, so I thought the neon shade would be perfect for recreating the feel of Mr. Binn's masterpiece. Start by making four 1.5" circle stitch lanyards. Next attach them together with chain by using pliers to slide the chain links under the side stitches of the lanyard. Drape loops of chain in varying lengths off the bottom chain (again using pliers to open and close the links). On each pin back, loop the ribbon through and superglue it flat on the back side. Attach the necklace links through the pin backs. Tie around your neck and adjust the bow until it hits at your desired length.


xx,CC

8.18.2009

Take A Bow

Summer is KNOT over yet, so take advantage of the warm weather in these ribbon knotted Lanvin sandals! Alber Elbaz certainly had sunshine in mind when designing his colorful Resort 2010 collection inspired by Acapulco, Mexico. Vibrant shades of azure, lime, and watermelon accent beautifully draped black ensembles. The standout pieces, however, are the fully fluffed out shoes! From rafia pom-poms to metallic high-tops, Mr. Elbaz's accessories are designed with the social butterfly (and her hectic schedule) in mind. These shoes were made for party hopping - er walking!


What You'll Need:
T-strap sandals (found at Target)
Two shade of grosgrain ribbon

Four large pearl beads
One packet of small crystals
Prong back settings (available at most craft stores)
Needle

Thread
Pliers
Scissors

First, tie six pieces of ribbon (double knotted) up the front strap of your sandal. Clip the ribbon off at an angle and fray the ends with the edge of your scissors. To attach the pearls thread your needle and double knot the end. Thread through the center of the ribbon knot from the underside. Slide the pearl onto the thread. Push the needle back through the ribbon close to where you made the first stitch. Repeat one more loop to secure, then tie off the thread underneath the grosgrain ribbon.


Finally it is time to add a little bling to the bows. Push a prong back setting through the underside of the ribbon so you can see the prongs poking through. Set the crystal in the middle. Use the pliers to bend the prongs to hold the crystal tightly in place. Repeat for however many crystals you want. I clustered mine around the pearls with a few spaced in between.


xx,CC

8.16.2009

Hear No Evil...

There is no disputing that Barbie has had a major influence on high fashion. She celebrated her 50th birthday last fashion week with a blow-out runway show featuring designs from the likes of Calvin Klein, Anna Sui, and of course Bob Mackie. Apart from the impact her distorted proportions have had on society, she is an iconic symbol of youth and beauty. Thanks to artist, Margaux Lange, the plastic princess "has become the accessory instead of being accessorized." Exploring the darker side of the bubblegum pop phenom, Margaux uses every imaginable doll part to create handcrafted jewelry available for sale on her website. However, if you have some old dolls lying around the house, you can easily put your own spin on these "hear-rings!"


What You'll Need:
Doll head

X-acto knife

Eye pins

Earring hooks or posts

Superglue

Crystals (the size of the ear)
Boondoggle thread (aka plastic lanyard)

Assorted beads

Pliers
Needle

The first step is not for the faint of heart. You'll need to take your X-acto knife and cut the plastic ears out of your doll's head in a large square shape. Then, squeeze some superglue onto the back of your square crystal and adhere it to the back off the plastic ear. This gives the earring a finished look should it twist around while you wear it. Next cut off the excess plastic around the crystal with the X-acto knife.

Take your plastic lanyard and superglue it around the four side of the square. Make sure the plastic overlaps at one corner and trim off the excess. Next, attach your earring hook or post to the loop on the eye pin using pliers. String the beads onto your eye pin in the desired pattern. Take the needle and poke it vertically into the top center of the ear square, where the eye pin with enter. This gets the hole started so it will not be as difficult to poke the eye pin through.

Finally, gently (but with force) ease the eye pin into the hole until it is about half way into the square. At this point you should be able to hold the earring upright without the beads falling off. Dab some superglue where the eye pin sits in the plastic ear to secure the post.

From a distance these look like any other beaded earring, but up close people get a macabre surprise!

xx,CC

8.11.2009

Safety First

No one does ironic jewelry quite like the notably candid Tom Binns. He has a penchant for taking fine "diamonds, emeralds, and shit" and dimming them down with sterling silver skulls and everyday objects such as laminated plastic. Take for instance his Rythym of Cruelty necklace. A pair of preppy pearls turn punk with the addition of a few safety pin closures. A veritable fountain of DIY inspiration, Mr. Binns also debuted a collection entitled "Get Real" at Colette in which he took magazine clippings of fine jewelry and laminated them to create wearable pieces. In a time when it's considered uncouth to flaunt one's wealth, Mr. Binns has come up with the perfect solution for the recessionista!

What You'll Need:
Safety pins
Pearl beads
Seed beads (optional)
Beading string
Two jump rings
Scissors
Pliers

Superglue

Seeing as how I just made a necklace, I decided to make a bracelet version on this go-round. Start by linking together three safety pins. Using the pliers, attach the two jump rings on either end of the chain of pins. Measure your beading string around your wrist (or neck), leaving ample room on each end. Double/triple knot the beading string to one of the jump rings. Put a dot of superglue on the knot (to ensure it won't come undone) and snip off the tail. String the pearls and beads together for the length of your bracelet. Knot, glue, and snip the second end!


If you have an overflow of safety pins and a bit more time on your hands, be sure to try his pin and pearl necklace.

xx,CC